PRODUCT CATALOG
12 products have been posted by this company
Kingperson Machinery Co., Ltd
China 
LT series screw conveyor applies to slope or vertical convey powder or
pellet materials, widely applies to small-sized grain, feed and the like
process industries, the power is optional according to the height.
1. Use vibratory motor as vibration source, dispense with regular maintenance, attractive outline, low noise;2. You can configure two or one layer sieve as you need;3. Screen box can get different amplitudes by adjusting centrifugal force of the vibratory motor, thus it has stronger sifting..
1. Concentrate the functions of refining ( aging later) and cooling the pellet in it, its construction is compact and the automation degree is high;2. The internal layer of the conditioner is made by stainless steel, steam tracing the interlayer, nollie blowdown, the refining time is up to..
1. Always take cooling effect on the pellets when the air from cold to hot, make full use of the air, as the result that need less air, low energy expenditure and no condensation;2. The charge-in uniformly distributed, omnibearing blowdown in the bottom, evenly cool down the pellet;3. Equipped with..
1. Uses the novel umbrella-type decompress machinery and dial sword system, avoid the materials stagnation or run unevenly, thus raise the evenness;2. The top and the bottom axis use the novel dust sealing construction, avoid the phenomenon of bearing damage caused by the dust;3. This machine fast..
1. The third generation mixing equipment, compared with the traditional horizontal mixer, the diameter of its mixing chamber is aggrandize, its length is shorten, that make for the mixing time;2. The section of the mixing chamber is dripping configuration, no dead angle, get the materials full..
1. PS series pellet crumbler is a new product which is designed after mastery and assimilation of international advanced model;2. Use alloy chilled roll, high hardness, long operating life;3. Applies mostly to the feed factories for crumbing the pellet feed and producing chick feed; provided..
1. A new upgrade model of the 1990s, the main performance index has up to the domestic advanced level;2. The main transmission use import high tensile narrow V-belt to drive, the overload factor is 1.4times higher than main motor power, reliable operation, much less noise than gear transmission;3...
1. A derive model from MODEL ZL2506 PELLET MILL, is mostly applied for dry pressing (no steam) pelletization, is a upgrade product;2. Fitness for small-sized livestock and poultry farms and aquatic farms use.
Using the latest international comminution theory,the latest model of the 21st century with intellectual property rights; Dripping pulverizing room, concealed rotor, designed of double hit and comminution, greatly improve grindability, the commution granularity is more even;Optimize the arrange of..
T series feed processing plant is a simplify and fully functioning
technology model, is hailed as feed factory with low cost and the cost
of investment is about one third of standard feed factory. The equipment
manual weighing and dosing. Its modality of dosing and comminution (or..
It is appropriate for livestock and poultry farms and small commercial feed processing and using. The specific characteristics are as follows:1.Use thor series 5611 dripping hammer mill and situated inside in pit, thus make it easier to fee in.2. The pellet mill refine and pelletization with steam,..
Add Company to Favourites